Crimper Tool Series: Crimper #8

0 comments

Apr 22

Crimper Tool Series: Crimper #8

Burndy Y39 Hypress Hand-Operated Hydraulic Tool, 10000 psi Operating Force, 3-1/8″ Head Width, 23″ Overall Length

Product Features

  • Hand-operated hydraulic crimper for use with a range of copper and aluminum terminals, splices, and taps in conjunction with a 10,000 psi hydraulic pump
  • Provides 12 tons of crimping force
  • Compatible with Burndy “U” dies (not included)
  • Molded rubber covering on head, body, and handles for protection
  • 3-1/8″ wide crimp head rotates 180 degrees for improved access to tight spaces

Product Description

The Burndy Y39 hand-operated hydraulic crimper provides 12 tons of crimping force, and is suitable for use in tight spaces with a range of copper and aluminum terminals, splices, and taps in conjunction with a 10,000 psi hydraulic pump. Its body and handles are covered with a 3/16″ layer of rubber for impact protection. Its 3-1/8″ wide crimp head rotates 180 degrees for improved access to tight spaces, and it comes equipped with a 10,000 pounds per square inch (psi) blow-off pressure release valve to ensure that the proper amount of crimp force is applied. Its rapid ram advance eliminates the need to pump handles to advance the ram to the connector, and it provides Underwriters Laboratories (UL)-listed and Canadian Standards Association (CSA)-certified connections when used in conjunction with Burndy Hylug and Hylink splices. This crimper is suitable for a wide range of industrial and commercial applications where an appropriate hydraulic pump is present.

Specifications

Crimper type Hydraulic, hand-operated
Crimp force 12 tons
Material Rubber covering
Weight 12 lb.
Dimensions 23″ long
For use with die type Burndy type “U” (not included)
For use with copper #6 AWG to 750 kcmil stranded code cable; flexible and extra flexible Navy cable N30 to N650 Uninsulated terminals: YA, YA-L, YA-LB, YGH, YGHA; Uninsulated splices and tees: YS, YS-L, YS-LB, YS-T, YSP-T, YST
For use with copper #6 to 4/0 AWG stranded code cable; AN6 to AN 4/0 flexible and extra flexible aircraft cable Uninsulated terminals: YAV-L Box, YAV-L, YAV-RS Box, YAV-RS; Uninsulated splices: YSV-L Box, YSV-L
For use with copper #8 to 2/0 AWG stranded code cable; AN8 to AN 2/0 flexible and extra flexible aircraft cable Insulated terminals: YAEV- L Box, YAEV- L, YAEV- RS Box, YAEV- RS, YAEV-RH
For use with copper taps #12 AWG solid to 250 kcmil YC-C, YGHC-C, YGHP-C, YGHR-C
For use with aluminum #8 AWG to 750 kcmil stranded code cable Terminals: YA-A; Splices: YS-A, YS-AT, YRB
For use with aluminum taps #6 AWG stranded to 500 kcmil YFD, YFN, YFO
Standards met UL listed, CSA certified
Crimpers, also called crimping tools, pinch wire terminals and connectors to wires to prepare them for use in electrical or communications applications. They have nests and indenters that vary in size and shape according to application. Manual crimpers are suitable for portable applications that create small terminal connections while power crimpers use air, electricity, hydraulic power, or a combination of these to aid compression, and are used in high volume applications. Crimpers can be used for applications ranging from manual field repairs to fully automated terminal production operations.

Note: For copyright information, please see the relevant comments on the Writing Samples parent page.

Feel free to comment! (Comments are approved automatically after the first manual approval.)